Page 5 of Meters

♦LCD
♦ON/OFF button
♦Wind speed unit switch button
♦Wind speed unit select button
♦Data hold button
♦LCD back light button
♦Max/Min/Avg/Diff function button
♦Connection leadwire
♦Fan

♦Electronic Condenser Microphone.
♦LCD Display.
♦Power switch.
♦Level range control switch:30dB~80dB;50dB~100dB;60dB~110dB;80dB~130dB.
♦Maximum value hold switch.(MAX)
♦Frequency weighting select switch.
A:A weighting for general sound level Measurements.
C:C- weighting for checking the low frequency content of noise.
♦Time weighting select switch. Fast: For normal measurements. Slow: For checking average level of fluctuating noise.
♦AC output terminal:0.707 Vrms Corresponding to each range step.
♦DC out put terminal:output 10mV/dB.
♦Calibration control.
♦External DC 9V power supply terminal.
♦Battery door.
♦Tripod mounting screw.
♦Windscreen.

This model Digital Light Meter LUX measurement range is 200;2,000;20,000;200,000Lux(20,000Lux range reading×10, 200,000Lux range reading×100)

The MS2006B leakager current meter features check for leakage and locate insulation breakdowns on live circuits, it measures leakage current down to 2mA with up to 1µA resolution and current up to 60 amps. Measuring only 6 3/4x2 1/2x1 inches, this is truly a pocket size meter, easy to carry around while onthego.

♦Conformance to IEC61010-1 CATIII 1000V
♦Large 6600 Counts LCD display
♦Auto Range and manual range
♦True RMS for AC Voltage and Current
♦Voltage/Current linear frequency measurement
♦AC Voltage,AC Current with 1K Hz 1 low passed 1 filter
♦Max,Min,AVG Value and record up to 100 data
♦Insulantion measure range 0.01MΩ to 2GΩ
♦Test Voltage 50V/100V/250V/500V/1000V
♦Live circuit detection
♦Timer
♦PI and DAR function

♦Optical resolution 10:1
♦Automatic range
♦Dual LCD Display
♦MAX、MIN、AVG value selectable
♦℃/℉display selection
♦Back light
♦Single-spot laser sighting
♦Hold function
♦Low battery indication
♦Auto Power Off

♦ Range:-1200mV~+1200mV. 
♦Pen type ORP meter, all in one, ORP electrode included,easy to use.
♦Water proof.
♦Auto calibration for 0mV,500mV.
♦Easy to change the electrode.
♦Temperature measurement,oC, oF. 
♦Build in temperature sensor, ATC ( auto temperature compensation ). 
♦LCD shows both mV value & temp..
♦Data hold function for freezing the desired value.
♦Auto power off without operation in 2omins.
♦Compact size,light weight.
♦Power supply by 1.5 V battery (LR44 ) x 4 PCs 
♦Available for wide applications, such as aquarium, beverage, fish hatcheries, food processing, photography, laboratory, quality control, school & colleges, swimming pools, water conditions.

♦ON/OFF key:press once to power on,again to power off.
♦USB DATA interface.
♦LCD display.
♦Connecting wire.
♦Fan

♦Conformance to IEC61010-1 CAT III 600V 
♦Display：1999counts
♦Diode Check： √
♦Continuity Check： √
♦Auto Range And Manual Range： √
♦Data Hold： √
♦MAX Value Measurement： √
♦Back Light： √
♦Net Cable Check：Test for open circuits,shorts,miswires,reversals,split pairs and LCD display the test result.Shield detection tests a cable's shield integrity.Main unit and one remote allow one person testing of T568A,T568B,10Base-T. Easy to read fault display and high speed testing.Debug mode for detailed fault identification results.
Low Battery Indication： √
♦Auto Power Off： √
♦None Contact Voltage Detect： √
♦Power Supply： 9V(6F22)
♦Dimension： 186(L)x88(W)x55(H)mm
♦Weight： Approx400g

♦Optical resolution 10:1
♦Automatic range
♦Dual LCD Display
♦MAX、MIN、AVG value selectable
♦℃/℉display selection
♦Back light
♦Single-spot laser sighting
♦Hold function
♦Low battery indication
♦Auto Power Off

A pH meter uses an electrode to measure the pH of a solution. Move your cursor over the image for information about the instrument. A digital pH meter consists of a special measuring probe (a glass electrode) connected to an electronic meter that measures and displays the pH reading.

♦0.00 to 14.00 pH. 
♦Pen type digital pH meter, all in one, pH electrode included,easy to use.
♦Water proof.
♦Provided with pH 4.01, pH 6.86, pH 9.18 buffer.
♦ Easy to change the pH electrode.
♦Temperature measurement,oC, oF.
♦Build in temperature sensor,ATC(auto temperature compensation). .
♦ Auto calibration for pH 4.01, pH 6.86, pH 9.18. 
♦ LCD shows both pH & temp..
♦ Data hold function for freezing the desired value.
♦Auto power off without operation in 20mins.
♦ Microcomputer circuit,intellgent function,high accuracy.   
♦Compact size,light weight.
♦Power supply by 1.5 V battery (LR44 ) x 4 PCs 
♦ Available for wide applications, such as aquarium, beverage, fish hatcheries, food processing, photography, laboratory, quality control, school & colleges, swimming pools, water conditions.