Page 3 of Meters

MS6252B is a professional Digital Anemometer with built-in high quality T&RH sensor which indicates Air-Temperature and relative Humidity while testing Air-Velocity/Flow.

Features:
♦Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature and Relative Humidity;
♦Easy to set Area dimensions are stored in the meter's intermal memory for the next power on;
♦Resolution of 0.01m/sec;
♦20 points average for Air Flow;
♦Super large (1999 counts) LCD Backlight Display;
♦Max/Min Hold and Display Hold Function;
♦Dual Display;
♦Backlight function;
♦Auto Power off;
♦Temperature scale switch: ℃/℉;
♦Overflow Indication: "OL" will be shown in LCD;
♦Low battery voltage indication;
♦USB Interface & PC-Software;
♦Size(H*W*D): 165mm*85mm*38mm
♦Weight: 200g
♦9V battery, USB cable, PC-software

This 3 in 1 digital sound level meter(sound level+temperature+humidity) is widely used to test noise at work,occupational noise and environmental and community noise.The environmental meter is also used in vehicle noise testing and other specialised applications.

MS6508 is a Digital Humidirty And Temperature meter with Wet Bulb Temperature And Dew Point Temperature, which has been designed to combine the functions of Humidity Meter,Temperature Meter, Wet Bulb Temperature and Dew Point Temperature.
 It is an ideal Humidity And Temperature Meter with scores of practical applications for laboratorial, industrial, Engineer and Professional use.

♦GPS Location function
♦lllumination measurement
♦Sound Level measurement
♦Temperature and humidity measurement
♦Anemo measurement
♦Atmospheric pressure measurement
♦GPS Location: Altitude Speed Acceieration
♦Data Hold and back light
♦Low battery
♦Over Range indication
♦Auto range and manual range
♦Fast and slow sampling rate selected
♦Max Value Hold
♦USB interface
♦DC 1.5V×6AA
♦DC 1.2V×6 Ni-MH AA Power Charger:Output:DC 12V 2A
♦Dimension: 282.5mm×104mm×63.5mm

The Digital C/L Meter is a professional instrument with 1999 counts. For measuring Capacitance and Inductance with battery operated.

♦Optical Resolution (D:S) (30:1)
♦Wide temperature measurement range
♦Laser target pointer
♦Readout is ℉&℃ selectable
♦Temperature Resolution: 0.1℃ or 0.1℉
♦LCD with double temperature display and 4 bits
♦MAX(highest), MIN(lowest),DIF(difference),and AVG(average) temperature display
♦Emissivity adjustable (0.10 to 1.00)
♦High-temp,and low-temp.alarm.
♦Data recording (record up to 100 group of data)
♦Response time: 500 msec
♦Laser power: Less than 1 milli watt
♦Optical Response: 8 um to 14 um
♦Working Voltage: 9V battery
♦Dimensions:Length 140x56x90
♦Weight: 500g
♦Accessories:Leather bag x1.9V battery(6F22)x1

♦Conformance to IEC61010-1 CAT II 1000V/CAT III 600V
♦22000 Counts and 44 Bargraph Display
♦True RMS for AC voltage and current
♦RS232 Interface
♦Data Hold, MAX/MIN, Relative Measurement
♦AC Voltage / Current with 1kHz ‘LOW PASSED’Filter
♦AC Voltage /Current Peak Value Measurement
♦Logic frequency/ Linear frequency /Duty cycle measurement
♦Diode, Continuity Test
♦Temperature Measurement
♦Resistance Measurement
♦CapacitanceMeasurement
♦Clamp Measurement
♦Full Overload Protection
♦Power: 220V/110V AC or DC 9V

♦Measuring voltage, current, voltage/current peak, effective/reactive/apparent power (single-phase), power factor, reactivity, phase angle, frequency, phase detection (3-phase), voltage/current harmonic levels (up to 20th) and total harmonic distortion (THD-F AND THD-R).
♦TRMS value can enforce the accuracy of measuring the non-sinusoidal waveforms or distorted waveforms.
♦Phase detection: Normal/reverse/missing (at 3-phase balanced load).
♦Record: MAX value and MIN value (effective in the voltage, current and effective/apparent power functions).
♦Data Storage: can memorize up to 100 measuring values, and download to PC software by RS-232 interface .
♦Low battery indication.
♦Data hold.
♦Auto power-off.
♦PC-link: RS-232C interface by optical insulating coupler.

♦Power measurement of 3-phase 3-wire, 3-phase 4-wire, single-phase mode
♦V, A, W, VA, VAR, kWh, PF, Hz measurement
♦Double display two parameters on each menu and store 28 groups of measurement parameter
♦Measure total power value and five power parameters of each phase in 3-phase measurement mode respectively
♦Autorange and TRMS display
♦With PC RS232 interface and windows graphics software
♦Display measurement time and select tested signal be power supply for the clamp at one time, the instrument can measurement for long time
♦Large LCD display, multifunctional button control

♦0.00 to 14.00 pH. 
♦Pen type digital pH meter, all in one, pH electrode included,easy to use.
♦ Water proof.
♦Provided with pH 4.01, pH 6.86, pH 9.18 buffer.
♦Easy to change the pH electrode. 
♦Build in temperature sensor, ATC ( auto temperature compensation ).
♦ Auto calibration for pH 4.01, pH 6.86, pH 9.18. 
♦LCD shows both pH & temp..
♦Data hold function for freezing the desired value.
♦High accuracy.
♦Compact size,light weight. 
♦Power supply by 1.5 V battery (LR44 ) x 4 PCs 
♦Available for wide applications, such as aquarium, beverage, fish hatcheries, food processing, photography, laboratory, quality control, school & colleges, swimming pools, water conditions.

Digital intelligent MCU paper moisture meter can work on 3 types paper (carton, copperplate paper, writing paper) through the spring contact precise measuring.

♦20M/60M measurement option
♦Start point selection
♦Computes areas and volume
♦Sum of lengths
♦Measures in imperial/metric
♦5 groups of value in memory
♦Backlight and laser indicator
♦Key sound,beeps for wrong reading finding and reading confirmation
♦Auto/manual power off option
♦Low battery indication
♦Measuringsensitivity adjustable
♦Measuring temperature