Page 2 of Digital Multimeters

♦5300 counts measurement
♦ACV(TRMS) / ACV+DCV/dBm and DCV measurements reach up to 1000V
♦0.001Ω resistance and 1µV voltage resolution
♦Logic frequency/ Linear frequency and duty cycle measurement
♦MAX/MIN/MAX-MIN value, relative value, average value measurement
♦VFD Display
♦RS232 Interface
♦Data Hold
♦Data Storage Function
♦Overload protection
♦Software calibrates automatically
♦Diode and continuity Test
♦ACV measurement frequency response reach up to 20kHz
♦Insulation performance reaching 1000V CAT II
♦Power: 220V/110V AC
♦Size: 350mm x 250mm x100mm
♦Weight: approx 2100g

♦Conformance to IEC61010-1 CAT II 1000V/CAT III 600V
♦22000 Counts and 44 Bargraph Display
♦True RMS for AC voltage and current
♦RS232 Interface
♦Data Hold, MAX/MIN, Relative Measurement
♦AC Voltage / Current with 1kHz ‘LOW PASSED’Filter
♦AC Voltage /Current Peak Value Measurement
♦Logic frequency/ Linear frequency /Duty cycle measurement
♦Diode, Continuity Test
♦Temperature Measurement
♦Resistance Measurement
♦CapacitanceMeasurement
♦Clamp Measurement
♦Full Overload Protection
♦Power: 220V/110V AC or DC 9V

♦Display: Digital and Analog Display, 4000 Counts and 42 Segments Bar Graph, Digit is 18mm High
♦Autorange and Manual Range
♦Data Hold, MAX/MIN, Relative Measurement
♦Storage Data Display/ Recall
♦True RMS for AC Voltage and Current
♦ADP Measurement: 400mV±0.3%, 10 Digit/1mV DC
♦Continuity Test
♦Back Light
♦Diode Test
♦RS232C Standard Interface
♦Power Source: AC or DC Power Supply

♦Conformance to IEC61010-1 CATIII 1000V
♦Large 6600 Counts LCD display
♦Auto Range and manual range
♦True RMS for AC Voltage and Current
♦Voltage/Current linear frequency measurement
♦AC Voltage,AC Current with 1K Hz 1 low passed 1 filter
♦Max,Min,AVG Value and record up to 100 data
♦Insulantion measure range 0.01MΩ to 2GΩ
♦Test Voltage 50V/100V/250V/500V/1000V
♦Live circuit detection
♦Timer
♦PI and DAR function

♦Conformance to IEC61010-1 CAT III 600V 
♦Display：1999counts
♦Diode Check： √
♦Continuity Check： √
♦Auto Range And Manual Range： √
♦Data Hold： √
♦MAX Value Measurement： √
♦Back Light： √
♦Net Cable Check：Test for open circuits,shorts,miswires,reversals,split pairs and LCD display the test result.Shield detection tests a cable's shield integrity.Main unit and one remote allow one person testing of T568A,T568B,10Base-T. Easy to read fault display and high speed testing.Debug mode for detailed fault identification results.
Low Battery Indication： √
♦Auto Power Off： √
♦None Contact Voltage Detect： √
♦Power Supply： 9V(6F22)
♦Dimension： 186(L)x88(W)x55(H)mm
♦Weight： Approx400g

Conformance to IEC 61010-1 CAT3 (600V)
♦Display : 1999 counts
♦Diode Check
♦Continuity Check
♦Auto range and manual range
♦Data Hold
♦MAX value measurement
♦Back light
♦Phone Check : Identify the state in the working telephone line; Busy, ringing or clear.
♦Tone: Judge continuity of the cables or wires.
Track the cables or wires, and diagnose the break point.
♦Net Cable Check : Test for open circuits, shorts, miswires, reversals, split pairs and LCD display the test result.
Shield detection tests a cable’s shield integrity.Main unit and one remote allow one person testing of T568A, T568B,10Base-T.
Easy to read fault display and high speed testing.
Debug mode for detailed fault identification results.
♦Low Battery indication
♦Auto power off
♦None Contact Voltage Detect
♦Power supply : 9V(6F22)
♦Dimension : 186(L) X 88(W) X 55(H)mm
♦Weight : Approximate 400g

The 5 in 1 Autorange Digital Multimeter is a professional instrument with 3999 counts. For measuring DC and AC voltage, DC and AC current, Resistance, Capacitance,Frequency,Temperature,Duty cycle,Sound level,Light,Humidity and Continuity Test with battery operated.

The Autorange Digital Multimeter with Infrared Thermometer is a professional instrument with 4000 counts. For measuring DC and AC voltage, DC and AC current, Resistance, Capacitance, Temperature and Transistor HFE Test with battery operated. 

The 5 in 1 Autorange Digital Multimeter is a professional instrument with 4000 counts. For measuring DC and AC voltage, DC and AC current, Resistance, Capacitance, Temperature Frequency,Duty,Sound Level,Light,Humidity and Continuity checking with battery operated. 

♦Auto power off 
♦Data hold 
♦Back light 
♦Surge protection 
♦Diode Check 
♦Continuity Check
♦Transisor Check 
♦Power Supply：1.5V(AA)x4
♦Size:205x102x58mm
♦Weight: Approx.390g(including battery)

♦AutoRange and Maual Range
♦DATA HOLD function
♦MAX/MIN value measurement
♦Full Overload protection
♦Relative measurement
♦Back Light
♦Low battery indication
♦Auto Power off
♦LPF function
♦Continnuity Test
♦Diode Test
♦Peak value Measurement
♦USB interface

♦Conform to the CAT.Ⅳ600V
♦Non-contact voltage detect
♦True Root Mean Square Measurement
♦Low Battery indication
♦Windows OS USB interface
♦Rel Function
♦Auto Power Off

♦Conform to the IEC1010-1 Standard CAT.Ⅲ1000V CAT.Ⅳ600V
♦Non-contact voltage detect
♦Full Overload Protection
♦Low Battery indication
♦Function characters indication
♦Auto Power Off
♦Data Hold
♦Back Light

♦Conform to the IEC1010-1 Standard CAT.Ⅲ1000V CAT.Ⅳ600V
♦Non-contact voltage detect
♦Full Overload Protection
♦Low Battery indication
♦Function characters indication
♦Auto Power Off
♦Data Hold
♦Back Light

♦Conform to the IEC1010-1 Standard CAT.Ⅲ1000V CAT.Ⅳ600V
♦Non-contact voltage detect
♦Full Overload Protection
♦Low Battery indication
♦Auto Range&Manual Range
♦Rel Function
♦Max/Min Function
♦Auto Power Off
♦Data Hold
♦Back Light

♦Conform to the IEC1010-1 standard CAT Ⅲ600V CAT Ⅱ1000V
♦Full over load protection
♦Resistance fuse inside
♦Data hold
♦Function characters indication
♦Low battery indication
♦Auto power off
♦Battery light
♦Diode Test
♦Hfe Test
♦Continuity Checking With Buzzer

♦Sound & light warning for the Incorrect inseting the input plug
♦Conform to the IEC1010-1 standard CAT Ⅲ600V CAT Ⅱ1000V
♦Full over load protection
♦Resistance fuse inside
♦Data hold
♦Function characters indication
♦Low battery indication
♦Back light
♦Auto power off
♦Diode Test
♦Hfe Test
♦Continuity Checking With Buzzer
♦Temperature Test

♦Sound & light warning for the Incorrect inseting the input plug
♦Conform to the IEC1010-1 standard CAT Ⅲ600V CAT Ⅱ1000V
♦Full over load protection
♦Resistance fuse inside
♦Data hold
♦Function characters indication
♦Low battery indication
♦Back light
♦Auto power off
♦Diode Test
♦Hfe Test
♦Continuity Checking With Buzzer
♦Temperature Test

♦Conform to the IEC1010-1 standard CAT Ⅲ600V CAT Ⅱ1000V
♦Full over load protection
♦Resistance fuse inside
♦Data hold
♦Function characters indication
♦Low battery indication
♦Auto power off
♦Diode Test
♦Hfe Test
♦Continuity Checking With Buzzer
♦Temperature Test

♦Data Hold
♦Diode Test
♦HFE Test
♦Continuity Checking With Buzzer
♦Display:2000 counts
♦Auto power off
♦Low battery indication
♦Power:9V(6F22)

The Digital Multimeter is a professional instrument with 2000 counts. For measuring DC and AC voltage, DC and AC current, Resistance ,℃and°F temperature with battery operated.

♦Designed to international safety standard IEC1010-1CAT Ⅲ600V
♦Double Molded
♦Maximum value measurement
♦Data hold
♦Back light
♦Auto power off
♦Fuselage colour : Gray
♦Weight: Approx.220g
♦Size: 158 mmx74 mmx31mm
♦Battery Test
♦Diode Test
♦Hfe Test
♦Continuity Checking With Buzzer
♦Temperature Test
♦Power:AAA(1.5V)x3 9V(6F22)

♦2000 Counts Digital Multimeter
♦Conform to the IEC1010-1 standard
♦CAT Ⅲ600V CAT Ⅱ1000V
♦Maximum value measurement
♦Data hold
♦Back light
♦Display: 2000 counts, digit is 16mm high
♦Fuselage colour: Gray
♦Weight: Approx.220g
♦Size: 158 mmx74 mmx31mm
♦Diode Test
♦Hfe Test
♦Continuity Checking With Buzzer
♦Power:AAA(1.5V)x3

The Digital Multimeter is a professional instrument with 2000 counts. For measuring DC and AC voltage, DC current and Resistance ,℃and°F temperature with battery operated.

The MAS830 digital multimeter is a compact, pocket-sized, 3.5 digit Multimeter that is ideal for use in the field, hobby, home and DIY applications.This  meter is extremely convenient for the on the go professional that needs to do basic measurements.
Weight : Approx. 170g
Size:138×69×31mm

The Digital Multimeter is a  professional instrument with 2000 counts. For measuring DC and AC voltage, DC and AC current,Resistance ,Capacitance and Frequency and duty cycle function with battery operated.

The Digital Multimeter is a  professional instrument with 4000 counts. For measuring DC and AC voltage, DC and AC current,Resistance ,Capacitance and Frequency function with battery operated.

The DT830B digital multimeter is a pocket-sized that is ideal for use in the field, hobby, home and DIY applications.This meter is extremely convenient for the on the go professional that needs to do basic measurements.

♦Conform to the IEC1010-1 standard CAT III 600V
♦The overmolding rubber case protects the meter
♦Retractable tip for safe storage
♦2000 counts LCD display
♦Auto/manual range
♦Maximum value hold
♦Data hold
♦Auto power off
♦Non-contact AC voltate of special frequency
♦The sensitivity of AC voltage ad justive
♦Sound and flash alarming
♦Continuity test
♦Diode test

♦Conform to the IEC1010-1 standard CAT III 600V
♦The overmolding rubber case protects the meter
♦Retractable tip for safe storage
♦2000 counts LCD display
♦Auto/manual range
♦Maximum value hold
♦Data hold
♦Auto power off
♦Resettable fuse inside
♦Logic level test
♦Continuity test
♦Diode test

The Smart Digital Multimeter is an auto scan professional multimeter meter with 3 2/3 digit and1999 counts. For measuring DC and AC voltage, DC and AC current, Resistance,Diode, and Continuity Buzzer with battery operated.

The Smart Digital Multimeter is an auto scan professional multimeter meter with 3 1/2 digit and1999 counts. For measuring DC and AC voltage, DC and AC current, Resistance,Diode, and Continuity Buzzer with battery operated.

♦Diode test:√
♦Hige test:√
♦Cable test: R45 / RJ12 / RJ11 / USB/phone line
♦Backlighting:√
♦Date Hold:√
♦Automatic range:√
♦Power:9V 6F22
♦Maximum Display:1999
♦Display Size: 30mmx57mm
♦Product Net weight: 322g(Including 9V Batteries)
♦Product Size:190mmx90mmx34mm

The TRUE RMS digital multimeter is an autorange professional multimeter meter with 6000 counts. For measuring DC and AC voltage, DC and AC current, Resistance, Capacitance, Frequency, Duty,Diode, and Continuity Buzzer with battery operated.