Page 3 of Digital Clamp Meters

The AC digital clamp meter is a professional clamp meter with function of measuring AC voltage,DC voltage,AC current,Resistance,Data Hold and Continuity Buzzer with battery operated.

♦Measuring voltage, current, voltage/current peak, effective/reactive/apparent power (single-phase), power factor, reactivity, phase angle, frequency, phase detection (3-phase), voltage/current harmonic levels (up to 20th) and total harmonic distortion (THD-F AND THD-R).
♦TRMS value can enforce the accuracy of measuring the non-sinusoidal waveforms or distorted waveforms.
♦Phase detection: Normal/reverse/missing (at 3-phase balanced load).
♦Record: MAX value and MIN value (effective in the voltage, current and effective/apparent power functions).
♦Data Storage: can memorize up to 100 measuring values, and download to PC software by RS-232 interface .
♦Low battery indication.
♦Data hold.
♦Auto power-off.
♦PC-link: RS-232C interface by optical insulating coupler.

♦Power measurement of 3-phase 3-wire, 3-phase 4-wire, single-phase mode
♦V, A, W, VA, VAR, kWh, PF, Hz measurement
♦Double display two parameters on each menu and store 28 groups of measurement parameter
♦Measure total power value and five power parameters of each phase in 3-phase measurement mode respectively
♦Autorange and TRMS display
♦With PC RS232 interface and windows graphics software
♦Display measurement time and select tested signal be power supply for the clamp at one time, the instrument can measurement for long time
♦Large LCD display, multifunctional button control

♦Measuring power, voltage, current, peak value, phase, frequency, power factor, phase angle, and reactive factor, etc of single/three phase circuit.
♦True effective value measurement: accurate measurement is possible even with serious distortion in current waveform.
♦Low-consumption high-speed single-chip microprocessor is employed and sophisticated algorithm is applied, as a result, results can be obtained rapidly and precisely, and up to 20 harmonics and distortion value thereof can be measured.
♦Current clamp jaw size: ¢26mm
♦Conform to the IEC61010-1 STANDARD CAT3 (600V)
♦Power supply: 1.5V AAA Batteryx3
♦Dimensions: 208mmx78mmx35mm
♦Weight: about 350g (included battery)

The MS2006B leakager current meter features check for leakage and locate insulation breakdowns on live circuits, it measures leakage current down to 2mA with up to 1µA resolution and current up to 60 amps. Measuring only 6 3/4x2 1/2x1 inches, this is truly a pocket size meter, easy to carry around while onthego.

The High Sensitivity Clamp leakager current meter features check for leakage and locate insulation breakdowns on live circuits.This is truly a pocket size meter, easy to carry around while on the go.

The AC digital clamp meter is an autorange professional clamp meter with 5999 counts. For measuring DC and AC voltage, AC current, Resistance, Capacitance, Frequency, ADP, Diode, and Continuity Test with battery operated.

The AC digital clamp meter is an autorange professional clamp meter with 5999 counts. For measuring DC and AC voltage, AC current, Resistance, Capacitance, Frequency, ADP, Diode, and Continuity Test with battery operated.

The AC digital clamp meter is an autorange professional clamp meter with 4000 counts. For measuring DC and AC voltage, AC current, Resistance, Capacitance, Frequency, ADP, Diode, and Continuity Test with battery operated.

The AC digital clamp meter is an autorange professional clamp meter with 4000 counts. For measuring DC and AC voltage, AC current, Resistance, Capacitance, Frequency, ADP, Diode, and Continuity Test with battery operated.

AC MINI Digital Clamp Meter
♦Conform to the IEC1010-1 Standard CAT III 600V
♦Double Molded Rubber Case
♦Data hold
♦SMT application
♦Auto/Manual range
♦Auto power off
♦MAX.DIAMETER FOR CONDUCTOR:
♦Weight:Approx. 240g
♦Size:208mm×78 mm×35 mm

AC MINI Digita l Clamp Meter 
♦Conform to the IEC1010-1 Standard CAT III 600V
♦Double Molded Rubber Case
♦Data hold
♦SMT application
♦Auto/Manual range
♦Auto power off
♦MAX.DIAMETER FOR CONDUCTOR:
♦Weight:Approx. 240g
♦Size:208mm×78 mm×35 mm

♦Jaw opening:Φ12.5mm
♦Auto range/Manual range
♦Display:4000 count LCD display (3 3/4 digit)
♦Overload protection:use the PTC protection circuit for resistance diode and continuity
♦DATA HOLD function
♦Back light function
♦AC Voltage detection function(NCV)
♦Low battery indication
♦Auto power off
♦Operating temperature&Humidy:0~40℃(32~104℉)& ♦Storage temperature&Humidy:-10~50℃(14~122℉)& ♦Power supply:1.5V battery x 3
♦Safety class:IEC61010-1,CATIII 600V
♦Dimension:21.3mmx55mmx29mm
♦Weight:approx. 310g

AC/DC MINI Digital Clamp Meter
♦Conform to the IEC1010-1 Standard CAT III 600V
♦Double Molded Rubber Case
♦Data hold
♦SMT application
♦REL Function
♦Auto power off
♦MAX.DIAMETER FOR CONDUCTOR: Φ26mm
♦Weight: appox340g
♦Size: 208mm×78 mm×35 mm

AC/DC MINI Digital Clamp Meter
♦Conform to the IEC1010-1 Standard CAT III 600V
♦Double Molded Rubber Case
♦Data hold
♦SMT application
♦REL Function
♦Auto power off
♦MAX.DIAMETER FOR CONDUCTOR: Φ26mm
♦Weight: appox340g
♦Size: 208mm×78 mm×35 mm

The AC digital clamp meter is an autorange professional clamp meter with 6000 counts. For measuring DC and AC voltage, AC current, Resistance, Capacitance, Frequency, Duty Cycle and Temperature with TRMS function.

The AC digital clamp meter is an autorange professional clamp meter with 6000 counts. For measuring DC and AC voltage, DC and AC current, Resistance, Capacitance, Frequency with TRMS function.

The AC digital clamp meter is an autorange professional clamp meter with 1999 counts. For measuring AC voltage, AC current, Resistance, Capacitance, Frequency,Diode, and Continuity Test with battery operated.

The AC digital clamp meter is an autorange professional clamp meter with 1999 counts. For measuring AC voltage, AC current, Resistance, Temperature test and Continuity Test with battery operated.

The AC/DC digital clamp meter is an autorange professional clamp meter with 3999 counts. For measuring AC voltage,DC voltage,AC current, Resistance, Diode,Duty cycle,Temperature test and Continuity Test with battery operated.

The AC digital clamp meter is a professional clamp meter with function of measuring AC voltage,DC voltage,AC current,Resistance and Continuity check with battery operated. 

The AC digital clamp meter is a professional clamp meter with function of measuring AC voltage,DC voltage,AC current,Resistance,temperature test and Continuity check with battery operated.

The AC digital clamp meter is a professional clamp meter with function of measuring AC voltage,DC voltage,AC current,Resistance,Frequency,Diode check and Continuity check with battery operated.

The AC digital clamp meter is a professional clamp meter with 3999 counts. For measuring DC and AC voltage, AC current, Resistance, Capacitance, Frequency, Duty cycle, Diode, and backlight auto off time limit mode with battery operated.

AC/DC TRMS Transducer 
When any DMM is at DCV range, connecting the plug of the transducer to DMM, We can do the AC/DC current measurement, replacing of the clamp meter by they.

AC/DC TRMS Transducer  
When any DMM is at DCV range, connecting the plug of the transducer to DMM, We can do the AC/DC current measurement, replacing of the clamp meter by they.

The AC Smart Clamp Multimeter is an autorange professional clamp meter with 3999 counts. For measuring DC and AC voltage, AC current, Resistance, Capacitance, Frequency, Diode, and Continuity Buzzer with battery operated.

The DC/AC TRUE RMS Smart Clamp Multimeter is an autorange professional clamp multimeter meter with 3999 counts. For measuring DC and AC voltage,DC and AC current, Resistance, Capacitance, Frequency, Diode, and Continuity Buzzer with battery operated.